Student_PilotAccording to the new FAA rule, as of April 1st, 2016 all new pilots now have to apply for their student pilot certificates through IACRA or on a paper 8710-1 (not encouraged). It helps to repeat after me “IACRA is my friend” because a positive attitude helps immensely when navigating this website for the first time. All DPEs (and many FAA Inspectors) initially struggled with this process but it works amazingly well once you understand the logic. You have probably worked this site recommending pilot applicants, this is a similar process. There is actual necessity for the complexity when you consider how many diverse certificates and ratings it needs to produce. The site requires everyone to log in as a “recommending instructor” to be a validator. The pdf manual for IACRA is here. The help desk number is now (844)322-6948.

First, remember you (CFI, DPE, ACR) are the validator of this applicant’s identity and ability to read, speak, write and understand English. The FAA guidance is from the 61.65G “In accordance with §61.193(b), before processing an application for a student pilot certificate, the authorized individual must ensure the applicant meets the eligibility requirements of § 61.83 as well as verify the applicant’s identity. The authorized individual should use AC 60-28 and the ICAO Web site to prepare for the assessment. (speaks English)”  And yes, you of course need to meet face-to-face; a virtual arrangement is not acceptable!

Every “validator” or agent will login for this process with the role of “recommending instructor” (as DPE I have done many glider and sport pilots with that role but that is gone). Make sure to advise your applicant before the meeting they  will need valid proof of identity: an unexpired government ID with a photo with printed expiration date. For young people without a license or passport that can also be a “Sheriff’s ID” so get that process started early. Make sure you have a fairly new web browser (without a pop-up blocker activated) and you have a pdf reader installed on your computer. You have to certify that your applicant can adequately speak, read, write, understand the English language also per AC 20-28.


This IACRA process begins with your applicant. They need to access the IARA website and establish a login and password and obtain their FTN (Federal Tracking Number). The new 61.65G is a little misleading here.
IACRAStudentRegisterAcquireFTNFTNsucess

Your student will now log out and then back into IACRA with this unique FTN and apply for their student pilot certificate. This is simple with 6 fields to complete.

StudentPIlotSelection

They are applying for a “pilot certificate” and the selection should be “student.” Like gliders and sport, no medical is needed here. The medical travels separately and could be acquired later (before solo obviously) according to the help desk. Here are some FAQs from the FAA guidance.

Once all six tabs in the application process are green, click “review”. This button should pop up a pdf of the application (depending on your internet connection this might require some waiting). Make sure you do not have a pop-up blocker set in your browser. This “review” step is required first before “submit” to make that button active. Once the applicant has reviewed the application (opened the pdf) close the document at the top of the pdf and they click “submit.” Once this is complete it should be available on-line for the CFI , DPE or ACR to retrieve and validate.  All validators for a student pilot certificate will enter IACRA in the role of “recommending instructor.”

So now finally it’s the CFI’s turn to login. You will need to meet with your student here since you validate their identity and command of English for this certification. This process cannot be performed remotely. ON the IACRA site, put in your (CFI) username and password and accept the “terms of service” in the role of “recommending instructor.”
CFIlogsInRCFI
When the page loads you will enter the student’s FTN in the box and it should bring up their application for action. There should be a pull down with several options here. This will open a page with a list of hyperlinked actions you need to complete in order. First is verification of identification. You must enter the data from the approved government ID accurately…check it twice!

There will be a link for the applicant to now login again to accept the PBR then “review” and “sign” their application (in each case “close” the pdf with the button on the top). The “signature” is a blue hyperlink which will center on the pdf and only requires a mouse click. If this does not appear, check for a pop-up blocker or suitable pdf reader installed on the computer. This can be slow depending on your internet connection. Once the application is “signed”, close this at the top of the document and the student’s part is complete.

As the final step, the CFI logs back in (with your CFI login/password) and again enters the student’s FTN as before. Now you should be able to complete the certification process with a “review” and “sign”. Both are pop-up pdfs and you might again need to wait for them to load depending on the speen of your connection.

There is lots of discussion about which browser to use for the IACRA process but most webkit versions work fine. My favorite, that seems to work on Mac or PC, is latest Firefox Browser. Remember in every step you will always have to “review” before you “sign” or the field will be gray and inoperative. Check your browser for a “pop-up blocker” or the pdfs will not load. Take your time and remember to always scroll to the bottom of the page for the action buttons…be patient and good luck!

Personally I would copy the final result with the date so you can track the progress on the application. There are many guesses on how long the plastic student pilot certificate will take coming from the FAA. You can always look up the date the gov. is currently working on [here]

Let me know if you discover snags in this description and I will update this so we create a clean and usable document for all CFIs and move this process forward. When I put a student through this process I will add any details that differ in the new sequence…good luck. If you have a problem, please write a comment and we can all learn something. Thanks…I hope this helps.


Please “follow” our SAFE blog to receive notification of new articles and please write us a comment if you see a problem or want to contribute an article. We always need more input on aviation excellence or flight safety. There are many highly qualified SAFE members out there! If you are not yet a member, please Join SAFE and support our mission of generating aviation excellence in teaching and flying. Our amazing member benefits alone make this commitment worthwhile fun!

About the author 

David St. George (Lifetime Member)

David St. George learned to fly at Flanders Valley Airport in 1970. Proving that everyone is eventually trainable, he became an FAA Gold Seal Flight Instructor for airplanes (single and multi, instrument, and glider) and serves the Rochester FSDO as an FAA Designated Pilot Examiner. In this capacity, he gives flight tests at any level from sport pilot to ATP and CFI. For 25 years David was East Hill Flying Club's 141 Chief Instructor and manager. David holds multi and single engine ATP pilot certificates, with pilot ratings for glider and seaplane and several jet type ratings. He recently earned his 13th renewal as a Master Instructor and owns an Aeronca Champ so he can build hours for that airline job! http://learnturbine.com

You may also like

SAFE at #OSH22!

SAFE at #OSH22!

Active Learning; Rewire Your Brain!

Active Learning; Rewire Your Brain!

Leave a Reply

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}